Hertz H8 DSP 8 Channel

£499.99

Hertz 8-channel DSP with Digital Remote Controller

 

Description

Hertz H8 DSP
This superb DSP from Hertz is packed full of innovative and unique features! Imagine having a particular setting for two-seat listening activated by a passenger simply climbing into your car. Get control of your in car sound. Use a 31-band graphic equaliser on each output channel complete with time alignment, Linkwitz and Butterworth filters, guided set up via PC and everything else you could possibly need from a DSP. Accurate, easy to use and of exceptional quality the Hertz H8 DSP offers functionality and quality sound previously only dreamt of at this price level.

» Operating power supply voltage 10.8 – 14.4 VDC
» Power supply 7.5 – 15 VDC
» Idling current 0.4 A
» Switched off without DRC 2.5 mA
» Switched off with DRC 4 mA
» Remote IN voltage 6.5 – 15 VDC (1.3 mA)
» Remote OUT voltage 12 VDC (130 mA)
» INPUT STAGE
» High Level (Speaker) FL – FR – RL – RR
» Low Level (Pre) AUX IN
» Digital Optical IN (S/PDIF max 96 kHz/24bit) OPTICAL IN
» EQUALIZER
» On Hi-Levels input (Speaker In) Automatic De-Equalisation On
» Outputs N.8 Graphic: �12 dB @ 31 Band
» ISO 1/3 Oct. 20 – 20k Hz
» SIZE
» W (Width) x H (Height) x D (Depth) mm/inch 191 x 34 x 131 / 7.51� x 1.33� x 4.76�
» Weight kg/lb 0.6 / 1.322
» OUTPUT STAGE
» Low Level Pre (default) FRONT TW L/R, FRONT WF L/R REAR L/R,
» SUB, CENTER
» SIGNAL STAGE
» Distortion – THD @ 1 kHz, 1V RMS Output 0.005%
» Bandwith @ -3 dB 10 – 22k Hz
» S/N Ratio @ A weighted
» Digital input 105 dBA
» Master Input 95 dBA
» AUX Input 96 dBA
» Channel Separation @ 1 kHz 85 dB
» Input sensitivity (Speaker In) 2 – 15 V RMS
» Input sensitivity (AUX In) 0.6 – 5 V RMS
» Input impedance (Speaker In) 2.2 k Ohm
» Input impedance (AUX) 15 k Ohm
» Max Output Level (RMS) @ 0.1% THD 4 V RMS
» CONNECTIONS
» From / To Personal Computer 1 x USB / B
» DRC HE Audio controls and Memory / Inputs selection
» Optical / AUX select Optical In / Aux wire control + 12V / GND enable
» Memory A / Memory B Memory A / B wire control + 12V / GND enable
» CROSSOVER N.8 (one for each output channel)
» Filter Type Full / High Pass / Low Pass / Band Pass
» Filter mode and slope Linkwitz @ 12 / 24 dB
» Butterworth @ 6 / 12 / 18 / 24 dB
» Crossover frequency 68 steps @ 20 – 20k Hz
» Phase control 0� – 180�
» TIME ALIGNMENT
» Distance 0 – 510 cm / 0 – 200.8 inch
» Delay 0 – 15 ms
» Step 0.08 ms; 2.8 cm / 1.1 inch
» Fine set 0.02 ms: 0.7 cm / 0.27 inch
» GENERAL REQUIREMENTS
» PC connections USB 1.1 / 2.0 / 3.0 Compatible
» Software/PC requirements:
» Microsoft Windows (32/64 bit):
» XP, Windows 7, Windows 8,
» Windows 10
» Graphic card min. resolution: 800 x 600
» Ambient operating temperature range: 0 �C to 55 �C (32