THINKWARE DASH CAM Q1000 2K 1440P 32GB Front & Rear Dashcam

£365.00

Add to Wishlist
Category: Tags: , ,
 

Description

The Q1000 Dash Cam from Thinkware captures 2K QHD footage via the latest Sony Exmor R Starvis image sensor. Providing 4x more vivid videos of your journeys, even at night via the award-winning Super Night Vision 3.0 technology.
The connected dash cam Q1000 has intelligent user accessibility at the forefront of its design with its ‘Connected Service’ feature.

2K QHD VIDEO QUALITY

Equipped with the latest Sony Starvis IMX335 Image Sensors allow for crisp clean 2K QHD 1440p front (156° viewing angle) and rear footage during both day and night at 30FPS. The wide angle lens view will minimize blind spots record more event details.
Thinkware Dash Cam Resolution Comparison HD, FHD, QHD
Thinkware Dash Cam Q1000 - Thinkware Dash Cam - £0.00
Receive notifications, review footage & track location when you are away from your vehicle in real-time via the Thinkware Connected smartphone app & PC Application.
Each Connected account can link up to 30 vehicles for FREE.
Ideal for families & fleet.
IOS
ANDROID
PC / MAC
Thinkware Dash Cam Q1000 - Thinkware Dash Cam - £0.00
Strong Impact Notifications while Driving

Strong Impact Notifications while Driving

Impact Notifications when Parked

Impact Notifications when Parked

Send Emergency Message

Send Emergency Message

Remote Live View

Remote Live View

Vehicle Status and Driving History

Vehicle Status & Driving History

Captured Image of Most Recent Parking

Captured Image of Most Recent Parking

To enable connected features, the Q1000 dash cam will need access to a data source (not your primary mobile phone). Connecting the dash cam to a mobile hotspot device or a Wi-Fi network with Internet access will consume data. Carrier/Service provider charges may apply.

FIND OUT MORE ABOUT THINKWARE CONNECTED

SUPER NIGHT VISION 3.0

Record night-time drives with true colours and minimal noise thanks to Thinkware’s latest advancements in low-light recording technology that surpasses its predecessors’ nighttime performance. The dash cam uses a combination of Digital Overlap High Dynamic Range (DOL HDR) and Noise Reduction technology to effectively reduce noise and lens flare effects that typically affect nighttime footage.

Play Video

PARKING SURVEILLANCE MODE

Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues.

Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality

Motion Detection

Monitor and capture any motion around the vehicle for potential vandalism attempts.

Impact Detection

Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.

TIME LAPSE PARKING MODE

Catch any potential bumps, scrapes and other incidents by recording footage from your vehicle when you are not nearby. Timelapse mode records at 2 frame per second (FPS) to reduce the size of the video file. This allows the dash cam to record longer than other dash cams whilst in parking mode.

Play Video

Play Video

ENERGY SAVING MODE

Reduce power consumption and provides longer video recording than normal parking mode. When you are away from your car for an extended period of time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and after an impact has been detected by the built-in G-sensor, it will wake up within a second and start recording for the next 20 seconds.

THINKWARE RADAR

Add the optional radar to access even more from your camera’s parking mode. With energy-saving mode, the dashcam will enter sleep mode when in parking mode. When the radar detects motion, the dashcam will power back up. If an impact is then detected, the camera will then save a 20-second clip (10 seconds before impact and 10 seconds after impact) and store this for viewing. If no impact is detected the unit will simply power back down to save your vehicle’s battery.

Thinkware Dash Cam Radar Module

Related products